| Shourt Line by Soft Works Ltd. | |||||
|
Model Railroad Products |
|||||
65003 American Diesel Sound Unit
BRAND NEW - Hard to find and out of production
This Sound Unit replicates the typical sounds of an American diesel locomotive. When the throttle is turned up slowly, you hear starting of the diesel engine, which then idles. The horn sounds when the loco starts: 2 long blasts when moving forward, 3 short blasts when reversing. After the loco stops, you hear the idling of the diesel motor. Then you hear the motor being turned off.
Shourt Line Direct Discount Price: $229.99 New
Use this advanced unit to retrofit your LGB loco with digital sound. Just connect two wires to track power or to a loco multi-purpose socket, and you're ready to enjoy digital LGB sound. (On DCC or MTS layouts, you don't need an additional decoder for the sound unit.)
In original package with LGB Instruction Manual, Sound Unit, LGB power cable & built in volume control
Features: BRAND NEW - Hard to find and out of production
The Sound Units make it easy to retrofit your LGB locos with digital sound. Simply place the Sound Unit in a loco, tender or car and connect two wires to a loco multi-purpose socket or to track power. The Sound Units’ features include:
- Integrated sound decoder for MTS and analog operation
- Digital electronic sound:
- Drive sounds synchronized to voltage
- Bell sounds
- Whistle sounds
- Brake sounds (only with Multi- Train System or DCC)
- Standing sounds
- Conductor announcement (only with Multi-Train System or DCC control)
- Volume control
- Remote control of sound features (with Multi-Train System or DCC control)
- Dimensions: 60 mm x 68 mm x 23 mm (2.4 in x 2.7 in x 0.9 in)
- Easy to install on all standard G scale cars or locos
- Volume control for indoor or outdoor use
- Digital sound quality
Operation:
Analog operation:
As soon as a low voltage is on the tracks, you hear the standing sounds. When track voltage increases, you hear the drive sounds, which are synchronized to the voltage in the tracks. Hint: You can program the drive sounds to start exactly when the loco starts. You need a PC and the 55045 MTS PC Decoder Programming Module or the 55015 Universal Remote.
DCC and Multi-Train System operation:
The Sound Unit is equipped with a factory- installed sound decoder for DCC and the LGB Multi-Train System. It can be used without modifications on analog or digital layouts. For operation with the Multi-Train System, the Sound Unit is programmed to loco address 03. For information on programming the loco address, see the instructions with your DCC or MTS system. When operating with the Multi-Train System, you hear the standing sounds while the loco is standing. When you turn up the MTS throttle, you hear the drive sounds synchronized to the drive steps. When operating with the Multi-Train System, you can remotely control the sound functions. Press the function buttons to control the following functions
65003 American Diesel Sound Unit
1: Horn signal “crossing”
2: Brake sound
3: Bell
4: Announcement: “High Ball, John!”
5: Air release for brake
6: Diesel engine off/on
7: Alarm bell
8: Sound off/on
Click here for Instruction Manual
Questions? Phone 310-622-4431
Thanks for looking - ShourtLine.com by Soft Works Ltd.
copyright 2014 Shourt Line - Soft Works Ltd. all rights reserved